Refine Your Search

Topic

Search Results

Standard

Nickel Alloy, Corrosion and Heat-Resistant, Bars, Forgings, and Rings 72Ni - 15.5Cr - 0.95Cb(Nb) - 2.5Ti - 0.70Al - 7.0Fe 1800 °F (982 °C) Solution Heat Treated, Precipitation Hardenable

2018-06-27
CURRENT
AMS5747E
This specification covers a corrosion and heat-resistant nickel alloy in the form of bars, forgings, and flash welded rings up to 4.00 inches, including (101.6 mm, including) in nominal diameter or least distance between parallel sides, and stock of any size for forging or flash welded rings (see 8.5).
Standard

Plating, Nickel-Cadmium Diffused

2018-06-21
CURRENT
AMS2416M
This specification covers the requirements for an electrodeposit of cadmium diffused into an electrodeposit of nickel on carbon, low-alloy, and corrosion-resistant steels.
Standard

Gaseous Nitrocarburizing

2018-06-11
CURRENT
AMS2759/13
This specification covers the engineering requirements for producing a continuous thin epsilon-iron-carbonitride compound layer on parts by means of a gaseous, low temperature carbon enriched nitriding process. The process is intended to utilize an atmosphere of high nitriding potential that produces a compound layer. If the compound layer is intended to be controlled automatically, AMS2759/12 shall be used.
Standard

Steel, Corrosion-Resistant, Bars, Wire, Forgings, Mechanical Tubing, and Rings 15Cr - 6.5Ni - 0.75Mo - 0.30 Cb (Nb) - 1.5Cu Consumable Electrode Remelted, Solution Heat Treated Precipitation Hardenable

2018-06-11
CURRENT
AMS5773F
This specification covers a premium aircraft-quality corrosion-resistant steel in the form of bars, wire, forgings, mechanical tubing, and flash welded rings 12.0 inches (305 mm) and under, in nominal diameter or least distance between parallel sides, and stock of any size for forging or flash welded rings (see 8.7).
Standard

Gas Nitriding of Low-Alloy Steel Parts

2018-06-11
CURRENT
AMS2759/6C
This document specifies the procedure and requirements for gas nitriding low-alloy and tool steels by the use of raw or dissociated ammonia. Additional alloys and steel families (e.g., stainless steels) can also be nitrided using parameters acceptable to the cognizant engineering organization.
Standard

Ion Nitriding

2018-06-11
CURRENT
AMS2759/8B
This specification establishes the requirements and procedures for producing a hard, wear resistant ion nitrided surface on steel parts.
Standard

Carburizing and Heat Treatment of Carburizing Grade Steel Parts

2018-06-11
CURRENT
AMS2759/7C
This specification, in conjunction with the general requirements for steel heat treatment covered in AMS2759, establishes the requirements and procedures for three classes of gas, vacuum, liquid, and low pressure (LPC) carburizing and related heat treatment of parts fabricated from carburizing grade steels. Parts made from steels other than those specified in the detail specifications may be heat treated in accordance with the applicable requirements using processing temperatures, times, and other parameters recommended by the material producer unless otherwise specified by the purchaser. This specification does not cover pack carburizing.
X