Criteria

Text:
Display:

Results

Viewing 421 to 450 of 17003
CURRENT
2016-10-12
Standard
AMS3897/1A
This specification covers one type of epoxy-resin-impregnated carbon fibers in the form of eight harness satin fabric woven from continuous fiber tow.
CURRENT
2016-10-11
Standard
AMS3801/2C
This specification covers one weight and one weave of low-modulus meta-aramid cloth.
CURRENT
2016-10-11
Standard
AMS3801/3C
This specification covers one weight and one weave of low-modulus meta-aramid cloth.
CURRENT
2016-10-11
Standard
AMS3801/4C
This specification covers one weight and one weave of low-modulus meta-aramid cloth.
CURRENT
2016-10-11
Standard
AMS3801/5C
This specification covers one weight and one weave of low-modulus resin treated meta-aramid cloth.
CURRENT
2016-10-10
Standard
AMS3359C
This specification covers a room-temperature-vulcanizing, elastomeric silicone compound.
CURRENT
2016-10-10
Standard
AMS3801/1C
This specification covers one weight and one weave of low-modulus meta-aramid cloth.
CURRENT
2016-10-06
Standard
AMS5599H
This specification covers a corrosion and heat-resistant nickel alloy in the form of sheet, strip, and plate up to 1.000 inch (25.4 mm) in nominal thickness.
CURRENT
2016-10-05
Standard
AMS4374
This specification covers an aluminum alloy in the form of extruded rods, bars, and profiles (shapes) produced with maximum cross sectional area of 56.1 in2 (36 193 mm2) and a maximum circumscribing circle diameter (circle size) of 20.2 inches (513 mm) (see 8.4.1).
CURRENT
2016-10-05
Standard
AMS5608G
This specification covers a corrosion and heat resistant cobalt alloy in the form of sheet, strip, and plate.
CURRENT
2016-10-03
Standard
AMS5846D
This specification covers a corrosion and heat-resistant nickel alloy in the form of bars, forgings, and forging stock.
CURRENT
2016-10-03
Standard
AMS2371K
This specification covers quality assurance sampling and testing procedures used to determine conformance to applicable material specification requirements of wrought corrosion and heat-resistant steel and alloy products and of forging stock.
CURRENT
2016-09-22
Standard
AMS3731/4C
Requiring an oven cure for attainment of maximum properties.
CURRENT
2016-09-22
Standard
AMS3731/9C
This specification covers a flexibilized epoxy resin formulation, supplied as a two-component system, requiring an oven cure for attainment of maximum properties.
CURRENT
2016-09-22
Standard
AMS3731C
This specification and its supplementary detail specifications cover epoxy resin formulations based on diglycidyl ether of bisphenol A with an epoxide equivalent of 175-195. When properly mixed and cured, these resisns produce a rigid or flexible product.
CURRENT
2016-09-22
Standard
AMS6455L
This specification covers an aircraft-quality, low-alloy steel in the form of sheet, strip, and plate.
CURRENT
2016-09-22
Standard
AMS6354G
This specification covers a low-alloy steel in the form of sheet, strip, and plate 4.00 inches (101.6 mm) and under in thickness.
CURRENT
2016-09-22
Standard
AMS3731/1C
This specification covers a unfilled, room-temeperature-polymerizing epoxy resin formulation, supplied as a two-component system.
CURRENT
2016-09-22
Standard
AMS3731/3C
This specification covers an epoxy resin formulation with fillers such as calcium carbonate, supplie as a two-component system, requiring an oven cure for attainment of maximum properties.
CURRENT
2016-09-22
Standard
AMS3731/2D
This specificiation covers a filled epoxy resin formulation, supplied as a two-component system, requiring an oven cure for attainment of maximum properties.
CURRENT
2016-09-22
Standard
AMS3731/7C
This specification covers a filled, room-temperature-polymerizing epoxy resin formulation, supplied as a two-component system.
CURRENT
2016-09-22
Standard
AMS3731/8C
This specification covers an epoxy resin formulation supplied as a two-component system, requiring an oven cure for attainment of maximum properties.
CURRENT
2016-09-22
Standard
AMS3731/5C
This specification covers a filled, room-temperature-polymerizing epoxy resin formulation, supplied as a two-component system.
CURRENT
2016-09-22
Standard
AMS3731/6C
This specification covers a glass or silica micosphere-filled epoxy resin formulation, supplied as a two-component system, requiring an oven cure for attainment of maximum properties.
CURRENT
2016-09-20
Standard
AMS4970K
This specification covers a titanium alloy in the form of bars, wire, forgings up to 4.000 inches (101.60 mm) inclusive and forging stock.
CURRENT
2016-09-20
Standard
AMS4625H
This specification covers one type of bronze in the form of bars and rods of any size, and tubing over 1.00 inches (25.4 mm) in nominal outer diameter (see 8.5).
CURRENT
2016-09-15
Standard
AMS2232H
This specification covers established inch/pound manufacturing tolerances applicable to carbon steel sheet, strip, and plate ordered to inch/pound dimensions. These tolerances apply to all conditions unless otherwise noted. The term “excl” is used to apply only to the higher figure of the specified range. Tolerances for product sizes not listed herein shall be as agreed upon by purchaser and vendor.
CURRENT
2016-09-14
Standard
AMS3894F
This specification and its supplementary detail specifications cover tape and sheet fabricated using carbon fibers impregnated with epoxy resin.
CURRENT
2016-09-14
Standard
AMS6434H
This specification covers an aircraft-quality, low-alloy steel in the form of sheet, strip, and plate.
CURRENT
2016-09-14
Standard
AMS3894/3C
This specification covers one type of epoxy-resin-impregnated carbon fibers in the form of tape and sheet.
Viewing 421 to 450 of 17003

Filter

  • Range:
    to:
  • Year: