Criteria

Text:
Display:

Results

Viewing 121 to 150 of 17003
CURRENT
2017-07-18
Standard
AMS2404H
This specification covers the requirements for electroless nickel deposited on various materials.
CURRENT
2017-07-17
Standard
AMS3255B
This specification establishes the requirements for an expanded polytetrafluoroethylene (EPTFE) in the form of sealing tape, gaskets, or sheets requiring no mixing or curing.
CURRENT
2017-07-17
Standard
AMS2482E
This specification establishes the requirements for a hard aluminum oxide coating, impregnated or codeposited with polytetrafluoroethylene (PTFE) on aluminum alloys.
CURRENT
2017-07-14
Standard
AMS4368
This specification covers discontinuously reinforced aluminum alloy (DRA) metal matrix composites (MMC) made by mechanical alloying of 6061B aluminum powder and SiC particulate, which is then consolidated by Hot Isostatic Pressing (HIP) into shapes between 12 to 100 in2 (0.008 to 0.065 m2) cross-section inclusive. Tensile property response to heat treatment has been demonstrated on samples of 1 in2 (645 mm2) maximum cross section (see 8.9).
CURRENT
2017-07-14
Standard
AMS4044N
This specification covers an aluminum alloy in the form of sheet and plate from .008 to 2.000 inches, incl (0.20 to 50.80 mm, incl) in thickness, supplied in the annealed (O) condition (see 8.4).
CURRENT
2017-07-13
Standard
AMS3681E
This specification covers an electrically-conductive adhesive supplied as two components, a silver-filled, epoxy-base adhesive and a separate curing agent which may be paste or liquid.
CURRENT
2017-07-11
Standard
AMS2631E
This specification covers the procedure for ultrasonic inspection of wrought titanium and titanium alloy products 0.25 inch (6.4 mm) and over in cross-section (thickness) or diameter.
CURRENT
2017-07-10
Standard
AMS2375E
This specification covers procedures for obtaining first-article (preproduction) approval of forgings and the controls to be exercised in producing subsequent production forgings.
CURRENT
2017-07-07
Standard
AMS7510/1C
This specification covers one type of samarium-cobalt permanent magnet.
CURRENT
2017-07-07
Standard
AMS4031J
This specification covers an aluminum alloy in the form of sheet and plate 0.020 to 2.000 inches (0.51 to 50.80 mm), inclusive, in nominal thickness, supplied in the annealed (O) condition (see 8.4). When specified, product shall be supplied in the “as fabricated” (F) temper.
CURRENT
2017-06-29
Standard
AMS4365
This specification covers an aluminum alloy in the form of plate from 3.000 to 8.000 inches (76.20 to 203.20 mm) in thickness (see 8.4).
CURRENT
2017-06-29
Standard
AMS7875F
This specification covers a blend of chromium carbide and a nickel-chromium alloy in the form of powder.
CURRENT
2017-06-28
Standard
AMS4375M
This specification covers a magnesium alloy in the form of sheet and plate from 0.016 to 3.000 inches (0.41 to 76.20 mm), inclusive, in thickness (see 8.4).
CURRENT
2017-06-28
Standard
AMS4915M
This specification covers a titanium alloy in the form of sheet, strip, and plate up to 4.000 inches (101.60 mm), inclusive.
CURRENT
2017-06-26
Standard
AMS4917J
This specification covers a titanium alloy in the form of sheet, strip, and plate through 4.000 inches (101.6 mm) nominal thickness.
CURRENT
2017-06-22
Standard
AMS5568H
This specification covers a corrosion and heat resistant steel in the form of welded tubing.
CURRENT
2017-06-22
Standard
AMS6512H
This specification covers a premium aircraft-quality, maraging alloy steel in the form of bars, forgings, mechanical tubing, flash welded rings up through 10.000 inches (254.00 mm) inclusive in diameter or least distance between parallel sides and stock for forging or flash welded rings.
CURRENT
2017-06-21
Standard
AMS4443H
This specification covers a magnesium alloy in the form of sand castings.
CURRENT
2017-06-21
Standard
AMS2249H
This specification defines limits of variation for determining acceptability of the composition of cast or wrought titanium and titanium alloy parts and material acquired from a producer.
CURRENT
2017-06-20
Standard
AMS4315A
This specification covers an aluminum alloy in the form of sheet and plate up to 2.000 inch (54.80 mm) inclusive, in thickness (see 8.5).
CURRENT
2017-06-19
Standard
AMS6514J
This specification covers a premium aircraft-quality steel in the form of bars, forgings, mechanical tubing, flash welded rings up through 10.000 inches (254.00 mm) inclusive in diameter or least distance between parallel sides, and stock for forging or flash welded rings.
CURRENT
2017-06-16
Standard
AMS4200C
This specification covers an aluminum alloy in the form of plate.
CURRENT
2017-06-16
Standard
AMS4300D
This specification covers boron filaments and 6061-0 aluminum alloy foil laminated and bonded into a composite sheet.
CURRENT
2017-06-16
Standard
AMS2380G
This specification covers the procedures for approval of products of premium-quality titanium alloys and the controls to be exercised in producing such products.
CURRENT
2017-06-15
Standard
AMS4084E
This specification covers an aluminum alloy in the form of sheet.
CURRENT
2017-06-15
Standard
AMS4046G
This specification covers an aluminum alloy in the form of sheet and plate clad on one side.
CURRENT
2017-06-13
Standard
AMS5826E
This specification covers a corrosion and heat-resistant steel in the form of welding wire.
CURRENT
2017-06-13
Standard
AMS5707N
This specification covers a corrosion and heat-resistant nickel alloy in the form of bars, forgings, flash welded rings, 3.25 inches (82.6 mm) and under and stock of any size for forging and for flash welded rings. (see 8.5).
CURRENT
2017-06-13
Standard
AMSA21180C
This specification covers the requirements for six alloy compositions, four inspection classes, four radiographic quality grades and six classes of mechanical properties of high strength aluminum-alloy castings.
Viewing 121 to 150 of 17003

Filter

  • Range:
    to:
  • Year: