This specification specifies the engineering requirements for heat treatment, by part fabricators (users) or their vendors or subcontractors. It also covers heat treatment by warehouses or distributors converting raw material from one temper to another temper. It covers the following aluminum alloys: 1100, 2004, 2014, 2017, 2024, 2048, 2117, 2124, 2219, 3003, 5052, 6013, 6061, 6063, 6066, 6951,7049, 7050, 7075, 7149, 7178, 7475.
This specification covers two methods for determining the percentage of delta ferrite in steels and other iron alloys. When applicable, this specification will be invoked by the material specification.
This specification covers two types of polyalkylene glycol in the form of a liquid. This product has been used typically as a quenching medium for solution heat treatment of aluminum alloys to minimize distortion and reduce residual stresses.
This specification establishes hardness and electrical conductivity acceptance criteria of finished or semi-finished parts of wrought aluminum alloys. This specification has been used typically for nondestructive testing of wrought aluminum alloy parts to aid in determining correctness of alloy, temper, and/or heat treatment, but usage is not limited to such applications.
This specification covers pyrometric requirements for thermal processing equipment used for heat treatment. It covers temperature sensors, instrumentation, thermal processing equipment, system accuracy tests, and temperature uniformity surveys. These are necessary to ensure that parts or raw materials are heat treated in accordance with the applicable specification(s).
This specification covers a corrosion and heat-resistant steel in the form of sheet, strip, foil, and plate. These products have been used typically for parts requiring corrosion resistance and high strength up to 600 °F (316 °C) and where such parts may require welding during fabrication, but usage is not limited to such applications. Certain design and processing procedures may cause these products to become susceptible to stress-corrosion cracking; ARP1110 recommends practices to minimize such conditions.
1. ACKNOWLEDGMENT: A vendor shall mention this specification number in all quotations and When acknowledging purchase orders. 2. APPLICATIONs Bolts and screws made primarily from AMS 6304 steel for use up to 900 F.
This specification covers an aluminum alloy in the form of plate. This plate has been used typically for parts requiring a high level of mechanical properties and resistance to exfoliation corrosion and moderate resistance to stress-corrosion cracking, but usage is not limited to such applications.