Criteria

Text:
Display:

Results

Viewing 31 to 60 of 17003
CURRENT
2017-10-19
Standard
AMS03_27A
This SAE Standard specifies the requirements for the nickel-plating of ferrous metals, copper alloys, aluminum alloys and zinc alloys for one or more of the following purposes: the production of wear-resistant surfaces; the building up of worn or over-machined surfaces; corrosion resistance; to provide an undercoat for subsequent deposits, e.g., chromium.
CURRENT
2017-10-18
Standard
AMS4337B
This specification covers an aluminum alloy in the form of extruded profiles (shapes) 0.500 to 1.500 inch, incl (12.7 to 38.1 mm, incl) in nominal thickness, and having a maximum cross-sectional area of 20 in2 (129 cm2) and a maximum circle size of 10 inches (254 mm) (see 8.7).
CURRENT
2017-10-18
Standard
AMS3217/8A
This specification covers a fluorocarbon (FKM) rubber stock in the form of molded test slabs.
CURRENT
2017-10-13
Standard
AMS6456E
This specification covers a low-alloy steel in the form of welding wire.
CURRENT
2017-10-13
Standard
AMS4463A
This specification covers an aluminum alloy in the form of plate 0.750 to 1.500 inch, incl ( 19.05 to 38.10 mm, incl) in thickness (see 8.5).
CURRENT
2017-10-13
Standard
AMS4296C
This specification covers an aluminum alloy in the form of sheet and plate 0.032 to 0.310 inch, incl (0.81 to 7.87 mm, incl) in thickness, clad on both sides (see 8.4).
CURRENT
2017-10-12
Standard
AMS6328N
This specification covers an aircraft-quality, low-alloy steel in the form of bars, forgings, mechanical tubing, and forging stock.
CURRENT
2017-10-12
Standard
AMS2804D
This specification covers the requirements for identification of castings.
CURRENT
2017-10-10
Standard
AMS4206C
This specification covers an aluminum alloy in the form of plate 0.500 to 1.500 inches (12.70 to 38.10 mm) inclusive, in thickness (see 8.4).
CURRENT
2017-10-10
Standard
AMS4464A
This specification covers an aluminum alloy in the form of plate 0.500 to 1.500 inch, incl (12.70 to 38.10 mm, incl) in thickness (see 8.4).
CURRENT
2017-10-10
Standard
AMS4467B
This specification covers an aluminum alloy in the form of alclad sheet and plate supplied in the -T861 temper.
CURRENT
2017-10-10
Standard
AMS4329B
This specification covers an aluminum alloy in the form of plate 4.001 to 7.000 inch, incl. (101.62 to 177.80 mm, incl.) in thickness (see 8.4).
CURRENT
2017-10-04
Standard
AMS03_28PT1A
This SAE Standard covers the requirements for coatings of high purity aluminum on low alloy steels, high strength steels, corrosion-resisting steels, aluminum alloys and titanium alloys and other materials where appropriate.
CURRENT
2017-10-04
Standard
AMS03_28PT3A
This SAE Standard specifies the requirements for coatings of titanium nitride on non-corrosion resisting and corrosion resisting steels, cast irons and other suitable materials. Standard engineering items such as coated tools, drills and dies would not normally be included.
CURRENT
2017-10-04
Standard
AMS03_28PT2A
This SAE Standard covers the requirements for the deposition of cadmium coatings on carbon steel, low alloy steels, high strength steels, corrosion resisting steels and other materials where appropriate.
CURRENT
2017-10-04
Standard
AMS03_9A
This SAE Standard specifies the requirements for the electro-deposition of silver on ferrous-base, copper-base, aluminum-base, zinc-base and nickel base materials. It is primarily intended for use on electrical and electronic items which are to be plated with silver to increase the electrical conductivity of the surface.
CURRENT
2017-10-04
Standard
AMS03_11A
This SAE Standard specifies requirements for the processing of iron and steel (excluding corrosion resisting steels) to produce coatings consisting essentially of inorganic phosphates, which are intended to be used in conjunction with supplementary finishes for the protection of the basis metal against corrosion (and in certain cases to give, additionally, anti-wear properties to sliding surfaces).
CURRENT
2017-10-04
Standard
AMS03_20A
This SAE Standard specifies the requirements for the electro-deposition of zinc on non-corrosion resisting steel items for protection against corrosion, and on copper-base alloy items and corrosion resisting steel items for the reduction of contact corrosion of less noble metallic materials. Zinc coatings shall not be used on items which are liable to be subjected to temperatures exceeding 350 °C.
CURRENT
2017-10-04
Standard
AMS03_19A
This SAE Standard specifies the requirements for the electro-deposition of cadmium on non-corrosion resisting steel items for protection against corrosion, and on copper based alloy items and corrosion resisting steel items for the reduction of contact corrosion of less noble metallic materials.
CURRENT
2017-10-04
Standard
AMS03_25A
This SAE Standard specifies the properties of sulphuric acid anodizing of aluminum and aluminum alloys.
CURRENT
2017-10-03
Standard
AMS6320P
This specification covers an aircraft-quality, low-alloy steel in the form of bars, forgings, flash welded rings, and stock for forging or flash welded rings.
CURRENT
2017-09-29
Standard
AMS6323M
This specification covers an aircraft-quality, low-alloy steel in the form of mechanical tubing.
CURRENT
2017-09-29
Standard
AMS2647F
This specification details requirements and procedures for the detection of defects in aircraft and engine components during maintenance and overhaul operations.
CURRENT
2017-09-27
Standard
AMS6450K
This specification covers a low-alloy steel in the form of wire supplied as coils, spools, and straight lengths.
CURRENT
2017-09-22
Standard
AMSM7866B
This specification covers the requirements for procurement of one grade of powdered molybendum disulfide to be used in lubricants and greases for surfaces where boundary conditions exist.
CURRENT
2017-09-22
Standard
AMS6327L
This specification covers an aircraft-quality, low-alloy steel in the form of bars and forgings.
CURRENT
2017-09-22
Standard
AMS2685F
This specification defines the requirements for joining metals and alloys using the gas-tungsten-arc welding (GTAW) methods.
CURRENT
2017-09-20
Standard
AMS2510F
This specification covers the engineering requirements for finishing aircraft parts and assemblies with an engine gray enamel.
CURRENT
2017-09-20
Standard
AMS2550F
This specification covers the engineering requirements for a treatment to provide enhanced corrosion resistance to sheet metal parts, such as brackets, spacers, and washers, fabricated from martensitic Corrosion-resistant steels, usually AMS 5504 or AMS 5508 and having hardness not higher than 40 HRC, or ferritic corrosion-resistant steels, usually AMS 5506. The treatment is not recommended for use on parts subject to impact in service.
CURRENT
2017-09-20
Standard
AMSM45202B
This specification covers the requirements for equipment, materials and procedures to be used in anodic treatments for magnesium base alloys for the purpose of increasing their corrosion resistance or producing surfaces suitable for the application of a protective organic finish.
Viewing 31 to 60 of 17003

Filter

  • Range:
    to:
  • Year: