Aerospace - Inspections

Viewing 1 to 50 of 201

Water Conditioning Agents for Aqueous Magnetic Particle Inspection

AMS K Non Destructive Methods and Processes Committee -

2013-03-25

This SAE Aerospace Standard (AS) covers water conditioning agents used to facilitate aqueous wet-method magnetic particle inspection. Such conditioning agents, in powder or liquid form, provide suita...

Historical versions of this standard are available.

SAE TECHNICAL STANDARDS

AMS2634C

Ultrasonic Inspection, Thin Wall Metal Tubing

Ams K Non Destructive Methods And Processes Committee

2013-01-23

This specification covers procedures for ultrasonic inspection of thin wall metal tubing of titanium, titanium alloy, and corrosion and heat resistant steels and alloys having nominal OD over 0.1875 i...

WIP- Not available for purchase at this time

SAE WORK IN PROGRESS TECHNICAL STANDARDS

ARP4402A

Eddy Current Inspection of Open Fastener Holes in Aluminum Aircraft Structure

Ams K Non Destructive Methods And Processes Committee

2013-01-23

This SAE Aerospace Recommended Practice establishes the requirements and procedures for eddy current inspection of open fastener holes in aluminum aircraft structures. This process has been used typi...

WIP- Not available for purchase at this time

SAE WORK IN PROGRESS TECHNICAL STANDARDS

AS4787A

Eddy Current Inspection of Circular Holes in Nonferrous Metallic Aircraft Engine Hardware

Ams K Non Destructive Methods And Processes Committee

2013-01-23

This SAE Aerospace Standard (AS) establishes minimum requirements for eddy current inspection of circular holes in nonferrous, metallic, aircraft engine hardware with fasteners removed. The inspectio...

WIP- Not available for purchase at this time

SAE WORK IN PROGRESS TECHNICAL STANDARDS

AMS2641B

Vehicle, Magnetic Particle Inspection, Petroleum Base

AMS K Non Destructive Methods and Processes Committee -

2012-10-30

This specification covers two types of refined hydrocarbon compounds in the form of liquids. This product has been used typically as a vehicle for the suspension of magnetic particles used in magnetic...

Historical versions of this standard are available.

SAE TECHNICAL STANDARDS

AMSSTD2154A

Inspection, Ultrasonic, Wrought Metals, Process For

AMS K Non Destructive Methods and Processes Committee -

2012-10-10

The purpose of this military standard is to provide uniform methods for the ultrasonic inspection of wrought metals and wrought metal products.

Historical versions of this standard are available.

SAE TECHNICAL STANDARDS

AMS2636

Ultrasonic Immersion Inspection Titanium and Titanium Alloy Forgings Premium Grade

AMS K Non Destructive Methods and Processes Committee -

2012-09-24

This specification covers procedures for ultrasonic immersion inspection of premium grade wrought titanium and titanium alloy forgings. Premium grade is a term used to describe titanium alloys used fo...

SAE TECHNICAL STANDARDS

AS9003A

Inspection and Test Quality Systems, Requirements for Aviation, Space, and Defense Organizations

G-14 Americas Aerospace Quality Standards Committee (AAQSC) -

2012-07-31

This standard includes selected quality system requirements from ISO 9001:2008[1] and AS9100:2009 applicable to noncomplex products and associated manufacturing processes. ISO 9001 text incorporated i...

Historical versions of this standard are available.

SAE TECHNICAL STANDARDS

AS6459

EDDY CURRENT SURFACE CRACK DETECTION IN AEROSPACE STRUCTURES

Ams K Non Destructive Methods And Processes Committee

2012-05-23

This SAE Aerospace Recommended Practice establishes the requirements and procedures for eddy current detection of surface cracks in aerospace structures. Procedures for eddy current inspection of op...

WIP- Not available for purchase at this time

SAE WORK IN PROGRESS TECHNICAL STANDARDS

AS1613B

Image Quality Indicator, Radiographic (STABILIZED May 2012)

AMS K Non Destructive Methods and Processes Committee -

2012-05-22

This Aerospace Standard establishes an identification system and provides design and tolerance information in describing two series of image quality indicators currently used in radiography of aerospa...

Historical versions of this standard are available.

SAE TECHNICAL STANDARDS

AS5282A

Tool Steel Ring for Magnetic Particle Inspection

Ams K Non Destructive Methods And Processes Committee

2012-03-19

This SAE Aerospace Standard (AS) establishes requirements for the manufacture and certification of tool steel rings for magnetic particle inspection.<p>These rings are used typically for determi...

WIP- Not available for purchase at this time

SAE WORK IN PROGRESS TECHNICAL STANDARDS

AMS2644F

Inspection Material, Penetrant

Ams K Non Destructive Methods And Processes Committee

2012-03-19

his specification establishes the classification, technical requirements, tests, and test procedures for the qualification, approval, and quality verification of all materials used in the liquid penet...

WIP- Not available for purchase at this time

SAE WORK IN PROGRESS TECHNICAL STANDARDS

ARP924B

Specification and Inspection of Glass for Integrally Lighted Aerospace Instruments

A-20a Crew Station Lighting

2011-09-06

This SAE Aerospace Recommended Practice (ARP) covers the requirements for the types of glass to be utilized in the fabrication of cover glasses and lighting wedges used in aerospace instruments. It d...

WIP- Not available for purchase at this time

SAE WORK IN PROGRESS TECHNICAL STANDARDS

AMS2631D

Ultrasonic Inspection, Titanium and Titanium Alloy Bar, Billet and Plate

AMS K Non Destructive Methods and Processes Committee -

2011-07-22

This specification covers the procedure for ultrasonic inspection of wrought titanium and titanium alloy products 0.25 inch (6.4 mm) and over in cross-section (thickness) or diameter.

Historical versions of this standard are available.

SAE TECHNICAL STANDARDS

AMS2647D

Fluorescent Penetrant Inspection, Aircraft and Engine Component Maintenance

AMS K Non Destructive Methods and Processes Committee -

2011-03-28

This specification details requirements and procedures for the detection of defects in aircraft and engine components during maintenance and overhaul operations.

Historical versions of this standard are available.

SAE TECHNICAL STANDARDS

AS5870

Thread Inspection Practices

E-25 General Standards for Aerospace and Propulsion Systems -

2010-01-26

This document addresses AS8879 thread inspection issues relating to selection, usage and capability of gages. It addresses the selection of calibrated measurement gages, the need for defined quality ...

SAE TECHNICAL STANDARDS

AMS2647C

Fluorescent Penetrant Inspection, Aircraft and Engine Component Maintenance

AMS K Non Destructive Methods and Processes Committee -

2009-07-10

This specification details requirements and procedures for the detection of defects in aircraft and engine components during maintenance and overhaul operations. This specification contains three ap...

A newer version of this standard is available.

SAE TECHNICAL STANDARDS

AMS2631C

Ultrasonic Inspection, Titanium and Titanium Alloy Bar and Billet

AMS K Non Destructive Methods and Processes Committee -

2009-07-08

This specification covers the procedure for ultrasonic inspection of wrought titanium and titanium alloy products 0.50 inch (12.7 mm) and over in cross-sectional thickness. This procedure has been us...

A newer version of this standard is available.

SAE TECHNICAL STANDARDS

AMS3046F

Magnetic Particles, Fluorescent, Wet Method, Oil Vehicle, Aerosol Packaged

AMS K Non Destructive Methods and Processes Committee -

2009-04-14

This specification covers one type of fluorescent magnetic particles in the form of a mixed, ready to use suspension in an odorless, inspection oil vehicle and packaged in aerosol cans. This product ...

Historical versions of this standard are available.

SAE TECHNICAL STANDARDS

AMS3157D

Oil Fluorescent Penetrant, High Fluorescence, Solvent Soluble

AMS K Non Destructive Methods and Processes Committee -

2009-01-08

CANCELLATION NOTICE This specification has been declared ¿CANCELLED¿ by the Aerospace Materials Division, SAE, as of January 2009 and has been superseded by AMS2644. The requirements of the latest iss...

Historical versions of this standard are available.

SAE TECHNICAL STANDARDS

AMS3156E

Oil, Fluorescent Penetrant, Water Washable

AMS K Non Destructive Methods and Processes Committee -

2008-12-15

This specification has been declared ¿CANCELLED¿ by the Aerospace Materials Division, SAE, as of December 2008 and has been superseded by AMS2644. The requirements of the latest issue of AMS2644 shal...

Historical versions of this standard are available.

SAE TECHNICAL STANDARDS

AMS3155E

Oil, Fluorescent Penetrant, Solvent-Soluble

AMS K Non Destructive Methods and Processes Committee -

2008-12-15

Historical versions of this standard are available.

SAE TECHNICAL STANDARDS

AMS3044F

Magnetic Particles, Fluorescent, Wet Method, Dry Powder

AMS K Non Destructive Methods and Processes Committee -

2008-12-15

This specification covers fluorescent magnetic particles in the form of a dry powder. These particles have been used typically as the inspection medium in wet, fluorescent magnetic particle inspection...

Historical versions of this standard are available.

SAE TECHNICAL STANDARDS

AMS3042E

Magnetic Particles, Nonfluorescent, Wet Method, Dry Powder

AMS K Non Destructive Methods and Processes Committee -

2008-12-12

This specification covers nonfluorescent, magnetic particles in the form of dry powders intended to be suspended in oil or conditioned water vehicle for use in the wet method, magnetic particle inspec...

Historical versions of this standard are available.

SAE TECHNICAL STANDARDS

AMS3043D

Magnetic Particles, Nonfluorescent, Wet Method, Oil Vehicle, Aerosol Packaged

AMS K Non Destructive Methods and Processes Committee -

2008-11-20

This specification covers nonfluorescent magnetic particles in the form of a mixed, ready to use suspension in an odorless oil vehicle and packaged in aerosol cans. These particles have been used typi...

Historical versions of this standard are available.

SAE TECHNICAL STANDARDS

AMS3045E

Magnetic Particles, Fluorescent, Wet Method, Oil Vehicle Ready-to-Use

AMS K Non Destructive Methods and Processes Committee -

2008-11-20

This specification covers fluorescent magnetic particles in the form of a mixed, ready to use suspension in an odorless inspection oil vehicle. These particles have been used typically as the inspecti...

Historical versions of this standard are available.

SAE TECHNICAL STANDARDS

AMS3040D

Magnetic Particles, Nonfluorescent, Dry Method

AMS K Non Destructive Methods and Processes Committee -

2008-11-20

This specification covers nonfluorescent, magnetic particles having black, red, gray, or other color, as specified, supplied in the form of dry powders. This product is used typically as an inspection...

Historical versions of this standard are available.

SAE TECHNICAL STANDARDS

AMS3041E

Magnetic Particles, Nonfluorescent, Wet Method, Oil Vehicle, Ready-to-Use

AMS K Non Destructive Methods and Processes Committee -

2008-11-20

This specification covers nonfluorescent magnetic particles in the form of a mixed, ready-to-use suspension in an odorless inspection oil vehicle. These products have been used typically as the inspe...

Historical versions of this standard are available.

SAE TECHNICAL STANDARDS

AMS2633C

Ultrasonic Inspection, Centrifugally-Cast, Corrosion-Resistant Steel Tubular Cylinders (NONCURRENT Apr 2007)

AMS K Non Destructive Methods and Processes Committee -

2007-04-05

This procedure covers ultrasonic inspection of tubular, centrifugally-cast, corrosion-resistant steel cylinders.

Historical versions of this standard are available.

SAE TECHNICAL STANDARDS

AMS2309A

Magnetic Rubber Inspection Material (Cancelled Apr 2007)

AMS K Non Destructive Methods and Processes Committee -

2007-04-05

This specification covers an inspection material in the form of a liquid room-temperature vulcanizing rubber filled with magnetic particles which is cured by addition of one or more curing agents. Th...

Historical versions of this standard are available.

SAE TECHNICAL STANDARDS

AMS2644E

Inspection Material, Penetrant

AMS K Non Destructive Methods and Processes Committee -

2006-10-30

Historical versions of this standard are available.

SAE TECHNICAL STANDARDS

AMS7295/5C

Radiographic Film, 3-80 (Cancelled Feb 2006)

AMS K Non Destructive Methods and Processes Committee -

2006-02-20

This specification covers one type of low-contrast, fine-grain radiographic film in the form of cut sheets or rolls.

Historical versions of this standard are available.

SAE TECHNICAL STANDARDS

AMS7295/6C

Radiographic Film, 3-30 (Cancelled Feb 2006)

AMS K Non Destructive Methods and Processes Committee -

2006-02-20

This specification covers one type of low-contrast, medium-grain radiographic film in the form of cut sheets or rolls.

Historical versions of this standard are available.

SAE TECHNICAL STANDARDS

AMS7295/7C

Radiographic Film, 3-30 (Cancelled Feb 2006)

AMS K Non Destructive Methods and Processes Committee -

2006-02-20

This specification covers one type of low-contrast, coarse-grain radiographic film in the form of cut sheets or rolls.

Historical versions of this standard are available.

SAE TECHNICAL STANDARDS

AMS7295/1C

Radiographic Film, 5-80 (Cancelled Feb 2006)

AMS K Non Destructive Methods and Processes Committee -

2006-02-20

This specification covers one type of high-contrast, fine-grain radiographic film in the form of cut sheets or rolls.

Historical versions of this standard are available.

SAE TECHNICAL STANDARDS

AMS7295/2C

Radiographic Film, 5-60 (Cancelled Feb 2006)

AMS K Non Destructive Methods and Processes Committee -

2006-02-20

This specification covers one type of high-contrast, medium-grain radiographic film in the form of cut sheets or rolls.

Historical versions of this standard are available.

SAE TECHNICAL STANDARDS

AMS7295/3C

Radiographic Film, 4-80 (Cancelled Feb 2006)

AMS K Non Destructive Methods and Processes Committee -

2006-02-20

This specification covers one type of medium-contrast, fine-grain radiographic film in the form of cut sheets or rolls.

Historical versions of this standard are available.

SAE TECHNICAL STANDARDS

AMS7295/4C

Radiographic Film, 4-60 (Cancelled Feb 2006)

AMS K Non Destructive Methods and Processes Committee -

2006-02-20

This specification covers on a type of medium-contrast, medium-grain radiographic film in the form of cut sheets or rolls.

Historical versions of this standard are available.

SAE TECHNICAL STANDARDS

AMS7295C

Radiographic Film and Paper, Industrial Grade (Cancelled Feb 2006)

AMS K Non Destructive Methods and Processes Committee -

2006-02-20

This specification and its supplementary detail specifications cover radiographic film and paper in the form of cut sheet or rolls.

Historical versions of this standard are available.

SAE TECHNICAL STANDARDS

AMS2308A

Magnetic Rubber Inspection

AMS K Non Destructive Methods and Processes Committee -

2005-04-25

This specification covers the procedural requirements necessary for the performance of magnetic rubber inspection.

Historical versions of this standard are available.

SAE TECHNICAL STANDARDS

ARP4047A

Aircraft Deicing Vehicle, Self-Propelled, Small Capacity (Cancelled Feb 2004)

G-12 Aircraft Ground De-Icing Steering Committee -

2004-02-16

This aerospace recommended practice covers requirements for a self-propelled, boom type aerial device, equipped with an aircraft deicing fluid spraying system. The unit shall be highly maneuverable fo...

Historical versions of this standard are available.

SAE TECHNICAL STANDARDS

AMS2644D

Inspection Material, Penetrant

AMS K Non Destructive Methods and Processes Committee -

2003-11-17

This specification establishes the classification, technical requirements, tests, and test procedures for the qualification, approval, and quality verification of all materials used in the liquid pene...

A newer version of this standard is available.

SAE TECHNICAL STANDARDS

ARP605

Routine Inspection and Test Procedures for Aircraft Refueling Hoses

G-3, Aerospace Couplings, Fittings, Hose, Tubing Assemblies -

2002-12-16

No abstract available

SAE TECHNICAL STANDARDS

AIR5386

Hose and Hose Assembly Selection, Installation, Inspection and Maintenance Guidelines, Listing of

G-3, Aerospace Couplings, Fittings, Hose, Tubing Assemblies -

2002-11-13

This SAE Aerospace Information Report (AIR) applies as general guidance to users of all hose and hose assembly types used in aerospace applications. See 6.4 for similar guidance for non-aerospace appl...

SAE TECHNICAL STANDARDS

AMS2644C

Inspection Material, Penetrant

AMS K Non Destructive Methods and Processes Committee -

2002-05-29

A newer version of this standard is available.

SAE TECHNICAL STANDARDS

AMS3043C

Magnetic Particles, Nonfluorescent, Wet Method, Oil Vehicle, Aerosol Packaged

AMS K Non Destructive Methods and Processes Committee -

2002-02-28

This specification covers nonfluorescent magnetic particle in the form of a mixed, ready-to-use suspension in an odorless oil vehicle and packaged in aerosol cans. These particles have been used typi...

A newer version of this standard is available.

SAE TECHNICAL STANDARDS

AMS3042D

Magnetic Particles, Nonfluorescent, Wet Method, Dry Powder

AMS K Non Destructive Methods and Processes Committee -

2002-02-28

This specification covers nonfluorescent magnetic particles in the form of dry powder intended to be suspended in oil or conditioned water vehicle. These particles have been used typically as the ins...

A newer version of this standard is available.

SAE TECHNICAL STANDARDS

AMS3046E

Magnetic Particles, Fluorescent, Wet Method, Oil Vehicle, Aerosol Packaged

AMS K Non Destructive Methods and Processes Committee -

2002-02-28

This specification covers one type of fluorescent magnetic particles in the form of a mixed, ready-to-use suspension in an odorless inspection oil vehicle and packaged in aerosol cans. Primarily as t...

A newer version of this standard is available.

SAE TECHNICAL STANDARDS

AMS3045D

Magnetic Particles, Fluorescent, Wet Method, Oil Vehicle Ready-To-Use

AMS K Non Destructive Methods and Processes Committee -

2002-02-28

The specification fluorescent magnetic particles in the form of a mixed, ready-to-use suspension in an odorless inspection oil vehicle. These particles have been used typically as the inspection medi...

A newer version of this standard is available.

SAE TECHNICAL STANDARDS

AMS3040C

Magnetic Particles, Nonfluorescent, Dry Method

AMS K Non Destructive Methods and Processes Committee -

2002-02-28

A newer version of this standard is available.

SAE TECHNICAL STANDARDS

Viewing 1 to 50 of 201