SAE Technical Standards

Viewing 1 to 50 of 15536
AS-1A Avionic Networks Committee -
2017-08-18
This test plan is broken into three major sections for the testing of bus controllers Electrical, Protocol and Noise tests.
SAE TECHNICAL STANDARDS
Fuel and Lubricants TC2 Industrial Lubricants -
2017-08-18
ISO 7745 shall be used for providing detailing, operational characteristics, advantages, disadvantages, and factors affecting the choice to be made among fire-resistant fluids.
SAE TECHNICAL STANDARDS
Fuel and Lubricants TC2 Industrial Lubricants -
2017-08-18
Properties for type AY oils are not addressed in this document.
SAE TECHNICAL STANDARDS
G-3, Aerospace Couplings, Fittings, Hose, Tubing Assemblies -
2017-08-18
SCOPE IS UNAVAILABLE.
SAE TECHNICAL STANDARDS
G-3, Aerospace Couplings, Fittings, Hose, Tubing Assemblies -
2017-08-18
SCOPE IS UNAVAILABLE.
SAE TECHNICAL STANDARDS
G-3, Aerospace Couplings, Fittings, Hose, Tubing Assemblies -
2017-08-18
SCOPE IS UNAVAILABLE.
SAE TECHNICAL STANDARDS
Surface Enhancement Committee -
2017-08-18
This SAE Recommended Practice Specification provides the procedures for using test strips per SAE J442 for peening processes.
SAE TECHNICAL STANDARDS
Signaling and Marking Devices Stds Comm -
2017-08-17
This SAE Standard provides test procedures, requirements, and guidelines for a daytime running light (DRL) function.
SAE TECHNICAL STANDARDS
AMS P Polymeric Materials Committee -
2017-08-17
This specification covers three classes of para-aramid tape and webbing of a single width and with varying weights.
SAE TECHNICAL STANDARDS
AMS D Nonferrous Alloys Committee -
2017-08-17
This specification covers a copper alloy (brass) in the form of seamless tubing with nominal OD of 0.405 inch (10.29 mm) to 10.75 inches (273.05 mm) and nominal weight of 0.253 lb/ft (0.38 kg/m) to 2....
SAE TECHNICAL STANDARDS
AMS E Carbon and Low Alloy Steels Committee -
2017-08-17
This specification covers a special aircraft-quality, low-alloy steel in the form of bars.
SAE TECHNICAL STANDARDS
E-25 General Standards for Aerospace and Propulsion Systems -
2017-08-17
This specification covers premium quality bolts and screws made from a low-alloy, heat-resistant steel and having threads of UNJ (MIL-S-8879) form.
SAE TECHNICAL STANDARDS
G-3, Aerospace Couplings, Fittings, Hose, Tubing Assemblies -
2017-08-17
SCOPE IS UNAVAILABLE.
SAE TECHNICAL STANDARDS
G-3, Aerospace Couplings, Fittings, Hose, Tubing Assemblies -
2017-08-16
SCOPE IS UNAVAILABLE.
SAE TECHNICAL STANDARDS
AMS E Carbon and Low Alloy Steels Committee -
2017-08-15
This specification covers a carbon steel in the form of wire supplied as coils of wire or as finished springs.
SAE TECHNICAL STANDARDS
AMS E Carbon and Low Alloy Steels Committee -
2017-08-15
This specification covers an aircraft-quality, low-alloy steel in the form of bars, forgings, mechanical tubing, and forging stock.
SAE TECHNICAL STANDARDS
AE-8C1 Connectors Committee -
2017-08-15
SCOPE IS UNAVAILABLE.
SAE TECHNICAL STANDARDS
AS-1A Avionic Networks Committee -
2017-08-15
This test plan consists of two major sections for testing of MIL-STD-1553B data bus systems: Bus Network and System Integration Tests.
SAE TECHNICAL STANDARDS
Truck and Bus Powertrain Steering Committee -
2017-08-15
Provide standard shift pattern guidelines for manual transmission shift controls in light, medium, and heavy trucks and buses.
SAE TECHNICAL STANDARDS
AMS E Carbon and Low Alloy Steels Committee -
2017-08-15
This specification covers a carbon steel in the form of sheet and strip.
SAE TECHNICAL STANDARDS
A-5A Wheels, Brakes and Skid Controls Committee -
2017-08-15
This SAE Aerospace Standard (AS) prescribes the Minimum Performance Standards (MPS) for wheel, brake, and wheel and brake assemblies to be used on aircraft certificated under 14 CFR Parts 23, 27, and ...
SAE TECHNICAL STANDARDS
AMS E Carbon and Low Alloy Steels Committee -
2017-08-15
This specification covers a premium aircraft-quality, low-alloy steel in the form of sheet, strip, and plate.
SAE TECHNICAL STANDARDS
AMS E Carbon and Low Alloy Steels Committee -
2017-08-15
This specification covers a low-carbon steel in the form of welding wire.
SAE TECHNICAL STANDARDS
AMS B Finishes Processes and Fluids Committee -
2017-08-15
This SAE Aerospace Recommended Practice defines a method for determining the weldability of weld filler metal in continuous coil or cut length form. It is applicable to all solid (non flux-containing)...
SAE TECHNICAL STANDARDS
AMS D Nonferrous Alloys Committee -
2017-08-14
This specification covers a copper-zinc alloy (brass) in the form of wire.
SAE TECHNICAL STANDARDS
Truck and Bus Powertrain Steering Committee -
2017-08-14
This SAE Recommended Practice describes STANDARD-DUTY and EXTREME-DUTY Pilot Bearing requirements and sizes for class 6, 7, and 8 on-highway trucks and buses that use diesel engines and manual transmi...
SAE TECHNICAL STANDARDS
AMS E Carbon and Low Alloy Steels Committee -
2017-08-14
This specification covers procedures for approval of premium quality forgings, usually serialized, the stock from which such forgings are produced, and the controls to be exercised in producing the fo...
SAE TECHNICAL STANDARDS
AMS E Carbon and Low Alloy Steels Committee -
2017-08-14
This specification covers low-carbon steel in the form of bars, forgings, mechanical tubing, sheet, strip, plate, and forging stock.
SAE TECHNICAL STANDARDS
AMS E Carbon and Low Alloy Steels Committee -
2017-08-14
This specification covers a low-carbon steel in the form of bars and wire 0.750 inch (19.05 mm) and under in nominal diameter or distance between parallel sides
SAE TECHNICAL STANDARDS
AMS E Carbon and Low Alloy Steels Committee -
2017-08-14
This specification covers low-alloy steel springs made of annealed round wire heat treated after forming.
SAE TECHNICAL STANDARDS
AS-1A Avionic Networks Committee -
2017-08-14
This test plan consists of two major sections for the production testing of bus controllers: Electrical tests and Protocol tests.
SAE TECHNICAL STANDARDS
AS-1A Avionic Networks Committee -
2017-08-14
This Aerospace Standard (AS) defines the test requirements for determining that bus monitors meet the requirements of MIL-STD-1553B, Digital Time Division Command/Response Multiplex Data Bus.
SAE TECHNICAL STANDARDS
Interior Climate Control Service Committee -
2017-08-14
This SAE standard applies to refrigerant identification equipment to be used for identifying an acceptable level of R-1234yf purity in a refrigerant tank or vehicle MAC system labeled as containing R-...
SAE TECHNICAL STANDARDS
Truck and Bus Powertrain Steering Committee -
2017-08-14
Although not limited to, these clutches are normally used on trucks considered as Medium-Duty (Class 6 and 7), as well as Heavy-Duty (Class 8).
SAE TECHNICAL STANDARDS
Wheel Standards Committee -
2017-08-14
This SAE Recommended Practice provides uniform procedures and minimum performance requirements for fatigue testing ferrous and aluminum wheels intended for normal highway service on travel, camping, a...
SAE TECHNICAL STANDARDS
Truck and Bus Powertrain Steering Committee -
2017-08-14
This SAE Recommended Practice establishes a single bolt pattern for the No. 1 clutch housing (see Figure 1) and the No. 2 clutch housing (see Figure 2). These four bolt patterns are designated to give...
SAE TECHNICAL STANDARDS
Acoustical Materials Committee -
2017-08-14
This SAE Recommended Practice describes a laboratory test procedure for measuring the thickness of various resilient insulating padding materials that are used in the automotive industry. Such padding...
SAE TECHNICAL STANDARDS
Fuels and Lubricants TC 3 Driveline and Chassis Lubrication -
2017-08-14
This SAE Standard defines the limits for a classification of automotive gear lubricants in rheological terms only. Other lubricant characteristics are not considered.
SAE TECHNICAL STANDARDS
AS-1A Avionic Networks Committee -
2017-08-10
This test plan is broken into two major sections for the production testing of remote terminals: Electrical and Protocol.
SAE TECHNICAL STANDARDS
AS-1A Avionic Networks Committee -
2017-08-10
This test plan defines the requirements of data bus components which comply with the requirements of MIL-STD-1553B, Digital Time Division Command/Response Multiplex Data Bus.
SAE TECHNICAL STANDARDS
AMS F Corrosion Heat Resistant Alloys Committee -
2017-08-10
This specification covers a corrosion and heat-resistant nickel alloy in the form of sheet, strip, and plate up to 2 inches (50.8 mm), inclusive, in nominal thickness (see 8.4).
SAE TECHNICAL STANDARDS
AS-1A Avionic Networks Committee -
2017-08-10
This SAE Aerospace Standard (AS) contains a sample test plan for AS15531 or MIL-STD-1553B Remote Terminals (RT) that may serve several different purposes. This document is intended to be contractually...
SAE TECHNICAL STANDARDS
AE-7A Generators and Controls Motors and Magnetic Devices -
2017-08-09
No Scope Available
SAE TECHNICAL STANDARDS
Truck and Bus Total Vehicle Steering Committee -
2017-08-09
The information in this SAE Information Report is the result of studies by the Automobile Manufacturers Association, American Trucking Association, and Truck Trailer Manufacturers Association, to achi...
SAE TECHNICAL STANDARDS
E-25 General Standards for Aerospace and Propulsion Systems -
2017-08-09
SCOPE IS UNAVAILABLE.
SAE TECHNICAL STANDARDS
G-3, Aerospace Couplings, Fittings, Hose, Tubing Assemblies -
2017-08-09
SCOPE IS UNAVAILABLE.
SAE TECHNICAL STANDARDS
Viewing 1 to 50 of 15536