Steel, Bars and Forgings 5.0cr 1.3mo 0.50v (0.38 0.43c)

Standard:
Revised:
  • 1998-03-01
 
  • HISTORICAL Access the latest revision: AMS6488H
Publisher:
  • SAE International
Pages:
9
Scope:

This specification covers a low-alloy steel in the form of bars, forgings, and forging stock.

These products have been used typically for parts requiring a steel capable of through-hardening to a minimum hardness of 50 HRC in section thicknesses up to 12 inches (305 mm) with relatively high levels of strength, fatigue resistance, ductility, and thermal stability in service from -100 degrees to +1000 degrees F (-73 degrees to +538 degrees C), but usage is not limited to such applications.

Certain design and processing procedures may cause these products to become susceptible to stress-corrosion cracking after heat treatment; ARP1110 recommends practices to minimize such conditions.

History:
Standard Published Revision Status
AMS6488H 2008-01-16 Latest Canceled
2003-06-16 Historical Revised
1998-03-01 Historical Revised
1992-01-01 Historical Revised
1985-01-01 Historical Revised
1979-01-15 Historical Revised
1978-07-15 Historical Revised
1971-05-15 Historical Revised
1963-07-15 Historical Issued
Access
Now
SAE MOBILUS Subscriber? You may already have access.
Buy
Select
Price
List
Download
$76.00
Add
Mail
$76.00
Members save up to 18% off list price.
Grade
If you are currently using this technical report:
Share
HTML for Linking to Page
Page URL

Related Items

Training / Education
2017-10-23
Training / Education
2013-04-09
Training / Education
2013-04-09
Training / Education
2013-04-09
Training / Education
2013-04-09
Training / Education
2013-04-09
Technical Paper / Journal Article
2008-09-16