Refine Your Search

Search Results

Standard

Secondary Filters for Fluid System Reliability

2012-09-24
CURRENT
AIR4057B
This SAE Aerospace Information Report (AIR) discusses the design choices and engineering trade-offs available to the system designer in the efficient selection and application of Last-Chance filters in contrast to main or primary system filters.
Standard

Guidelines for Integration of Engine Monitoring Functions With On-Board Aircraft Systems

1996-06-01
HISTORICAL
AIR4061A
This SAE Aerospace Information Report (AIR) discusses physical and functional integration of main engine and auxiliary power unit (APU) monitoring with other on-board systems. It includes General Considerations, Parameter Selection and Requirements, Signal Sources, Signal Conditioning, Data Processing, Data Storage, and Data Retrieval. Engine monitoring hardware and software are discussed so that they may be properly considered in an integrated design. Civil and military aviation applications are included and delineated where requirements differ.
Standard

Guidelines for Integrating Typical Engine Health Management Functions Within Aircraft Systems

2008-02-14
HISTORICAL
AIR4061B
SAE Aerospace Information Report (AIR) 4061 provides best practice guidelines for the integration of Engine Health Management (EHM) system functions within aircraft systems to include both its main engine(s) and any Auxiliary Power Unit(s) (APU). This document provides an overview of some of the functions EHM typically integrates, offers some system variations encountered with different aircraft, and suggests general considerations involved with integration. It presents a sample EHM parameter coverage matrix to show the types of parameters with which a typical EHM system might interface, offers insight into signal and data processing and retrieval, and offers a view of typical EHM parameter requirements by function. Where practical, this document delineates between military and commercial practices.
Standard

GUIDELINES FOR INTEGRATION OF ENGINE MONITORING FUNCTIONS WITH ON-BOARD AIRCRAFT SYSTEMS

1990-01-01
HISTORICAL
AIR4061
This Aerospace Information Report (AIR) discusses physical and functional integration of main engine and auxiliary power unit (APU) monitoring with other on-board systems. It includes General Considerations, Parameter Selection and Requirements, Signal Sources, Signal Conditioning, Data Processing, Data Storage, and Data Retrieval. Engine monitoring hardware and software are discussed so that they may be properly considered in an integrated design. Civil and military aviation applications are included and delineated where requirements differ.
Standard

Secondary Filters for Fluid System Reliability

2000-12-01
HISTORICAL
AIR4057A
This SAE Aerospace Information Report (AIR) discusses the design choices and engineering trade-offs available to the system designer in the efficient selection and application of Last-Chance filters in contrast to main or primary system filters.
Standard

Icing Technology Bibliography

2007-04-11
HISTORICAL
AIR4015B
This Icing Technology Bibliography is a compendium of references from the open literature that were published prior to the original 1987 issuance of the AIR, including both national and foreign sources. Due to the generality of the subject, and the difficulty of fully investigating every available source, the Bibliography in this document is not intended to be complete.
Standard

Icing Technology Bibliography

1996-07-01
HISTORICAL
AIR4015A
This Icing Technology Bibliography is a compendium of references from the open literature, including both national and foreign sources. Due to the generality of the subject, and the difficulty of fully investigating every available source, the present Bibliography is not intended to be complete. However, it will be updated every 18 months by the SAE AC-9C Aircraft Icing Technology Subcommittee. Any suggestions in terms of additional references, sources, and corrections should be referred to the Icing Technology Bibliography Panel of the SAE AC-9C Aircraft Icing Technology Subcommittee.
Standard

Icing Technology Bibliography

1987-11-03
HISTORICAL
AIR4015
This Icing Technology Bibliography is a compendium of references from the open literature that were published prior to the original 1987 issuance of the AIR, including both national and foreign sources. Due to the generality of the subject, and the difficulty of fully investigating every available source, the Bibliography in this document is not intended to be complete.
Standard

Multiplex Data Bus Networks for MIL-STD-1760 Stores

2005-09-29
HISTORICAL
AIR4013B
This SAE Aerospace Information Report (AIR) will examine network aspects of open and shorted stubs, line reflections and bus loading due to network changes. Single network level is assumed, that is, no carriage store hierarchical levels. However, two passive network coupling variants called "branched bus" and "branched stub" will be introduced that possibly could be used in a stores management network. This report assumes familiarity with MIL-STD-1553B.
Standard

Icing Technology Bibliography

2013-03-15
CURRENT
AIR4015D
This Icing Technology Bibliography is a compendium of references from the open literature that were published prior to the original 1987 issuance of the AIR, including both national and foreign sources. Due to the generality of the subject, and the difficulty of fully investigating every available source, the Bibliography in this document is not intended to be complete.
Standard

AIRCRAFT NOSE WHEEL STEERING/CENTERING SYSTEMS

1991-03-01
HISTORICAL
AIR1752
This document covers both military aircraft (land-based and ship-based) and commercial aircraft. It is intended that the document be continually updated as new aircraft and/or new "lessons learned" become available.
Standard

Aircraft Engine Fuel Feed and Transfer Component Pressure Definitions

1991-02-13
CURRENT
AIR1749
The information in this document is limited to aircraft engine fuel feed, refueling, and transfer components (reference 2.1). It is assumed that isothermal, liquid fluid conditions exist, herein referred to as fuel. Where a unit of measure is suffixed, this is intended to show a generally associated unit for illustration only and is not an exclusive endorsement of this particular term. Where applicable and allowable it is understood that a referee fluid may be substituted for fuel.
Standard

Aircraft Engine Fuel Feed and Transfer, Component Pressure Definitions

2018-06-05
WIP
AIR1749A
The information in this document is limited to aircraft engine fuel feed, refueling, and transfer components. It is assumed that isothermal, liquid fluid conditions exist, herein referred to as fuel. Where a unit of measure is suffixed, this is intended to show a generally associated unit for illustration only and is not an exclusive endorsement of this particular term. Where applicable and allowable it is understood that a referee fluid may be substituted for fuel.
Standard

INFORMATION ON ANTISKID SYSTEMS

1988-01-01
HISTORICAL
AIR1739
This Aerospace Information Report (AIR) has been prepared by a panel of the SAE A-5 Committee and is presented to document the design approaches and service experience from various applications of antiskid systems. This experience includes commercial and military applications.
X