Criteria

Text:
Content:
Display:

Results

Viewing 211 to 240 of 43460
HISTORICAL
1992-04-01
Standard
AMS3267A
This specification and its supplementary detail specifications cover accelerated curing synthetic rubber compounds with corrosion inhibitors and low adhesive strength, supplied as a two-component system, curing at room temperature.
HISTORICAL
1993-10-01
Standard
AMS3269
This specification covers three class of fuel-resistant polysulfide (T) sealing compound with high strength and temperature characteristics, supplied as a two-component system which cures at room temperature. This sealing compound has been used typically in sealing aircraft integral fuel tanks, fuel tank fillets and faying surfaces, pressure barriers and moldline surfaces, but usage is not limited to such applications. The sealing compound is resistant to jet fuels and is capable of withstanding long-term exposure from -65 to 250 degrees F (-54 to 121 degrees C) and short-term exposure (six hours) to 360 degrees F (182 degrees C).
CURRENT
2011-08-25
Standard
AMS3271B
This specification covers a polychloroprene-coated, one side only, nylon knit in the form of cloth.
HISTORICAL
2011-08-25
Standard
AMS3271
This specification covers a polychloroprene-coated, one side only, nylon knit in the form of cloth.
HISTORICAL
2011-08-25
Standard
AMS3272
This specification and its supplementary detail specifications cover a woven nylon cloth coated with polyether (EU) urethane which is thermally, radio frequency, or ultrasonically sealable and having air holding characteristics.
HISTORICAL
1990-07-01
Standard
AMS3271A
This specification covers a polychloroprene−coated, one side only, nylon knit in the form of cloth.
HISTORICAL
1990-07-01
Standard
AMS3272A
This specification and its supplementary detail specifications cover a woven nylon cloth coated with polyether (EU) urethane.
CURRENT
2011-08-25
Standard
AMS3272B
This specification and its supplementary detail specifications cover a woven nylon cloth coated with polyether (EU) urethane.
HISTORICAL
1991-10-01
Standard
AMS3328
This specification covers a fluorosilicone (FVMQ) rubber in the form of sheet, strip, tubing, extrusions, and molded shapes.
HISTORICAL
1994-07-01
Standard
AMS3328A
This specification covers a fluorosilicone (FVMQ) rubber in the form of sheet, strip, tubing, extrusions, and molded shapes.
CURRENT
2016-04-19
Standard
AMS3328C
This specification covers a fluorosilicone (FVMQ) rubber in the form of sheet, strip, tubing, extrusions, and molded shapes. This specification is not recommended for use in the manufacture of O-rings, O-ring Cord, or Molded in Place gaskets. For the manufacture of O-rings, O-ring Cord, or Molded in Place gasketsthe use of AMS-R-25988, Type I, Class 1, Grade 40 is recommended.
HISTORICAL
2010-05-17
Standard
AMS3328B
This specification covers a fluorosilicone (FVMQ) rubber in the form of sheet, strip, tubing, extrusions, and molded shapes.
HISTORICAL
1998-03-01
Standard
AMS3333
This specification covers types and classes of polysulfide sealing compound supplied as a two-component system suitable for application by brush, or by extrusion gun, spatula brush, or roller.
HISTORICAL
2008-03-17
Standard
AMS3333A
This specification covers types and classes of polysulfide sealing compound supplied as a two-component system suitable for application by brush, or by extrusion gun, spatula brush, or roller.
CURRENT
2012-01-17
Standard
AMS3333B
This specification covers types and classes of polysulfide sealing compound supplied as a two-component system suitable for application by brush, or by extrusion gun, spatula brush, or roller.
HISTORICAL
1998-12-01
Standard
AMS3306B
This specification covers a silicone elastomer in the form of sheet, strip, tubing, extrusions, and molded shapes.
HISTORICAL
1991-01-01
Standard
AMS3306A
This specification covers a silicone elastomer in the form of sheet, strip, tubing, extrusions, and molded shapes.
HISTORICAL
1986-10-01
Standard
AMS3306
This specification covers a silicone elastomer in the form of sheet, strip, tubing, extrusions, and molded shapes. These products have been used typically as seals from -65 degrees to +225 degrees C (-85 degrees to +437 degrees F), compounded especially for high strength. Silicone rubber is resistant to deterioration by weathering and by high-aniline-point petroleum-base lubricating oil and phosphate ester hydraulic fluid, and remains flexible over the temperature range noted. This material is not normally suitable for use in contact with hydrocarbon-based fuels and low-aniline-point petroleum-base fluids due to excessive swelling of the elastomer, but usage is not limited to such applications. Each application should be considered individually.
CURRENT
2014-05-27
Standard
AMS3306C
This specification covers a silicone elastomer in the form of sheet, strip, tubing, extrusions, and molded shapes.
CURRENT
2014-05-08
Standard
AMS3323A
This specification covers a fluorosilicone (FVM) rubber sponge in the form of sheet, strip, extrusions, and molded shapes.
HISTORICAL
1990-01-01
Standard
AMS3323
This specification covers a fluorosilicone (FVM) rubber sponge in the form of sheet, strip, extrusions, and molded shapes.
2016-04-27
WIP Standard
AMS3316A
This specification covers a fiberglass reinforced silicone rubber in the form of sheet, strip, and molded parts, color coded light blue per ARP1527.
CURRENT
2001-02-01
Standard
AMS3316
This specification covers a fiberglass reinforced silicone rubber in the form of sheet, strip, and molded parts, color coded light blue per ARP1527.
HISTORICAL
2008-03-17
Standard
AMS3279C
This specification covers one type of sprayable fuel resistant polythioether sealing compound supplied as a two-component system.
HISTORICAL
2005-06-22
Standard
AMS3279B
This specification covers one type of sprayable fuel resistant polythiother sealing compound supplied as a two-component system.
HISTORICAL
2001-09-01
Standard
AMS3279A
This specification covers one type sprayable fuel resistant polythioether urethane sealing compound supplied as a two-component system.
HISTORICAL
1997-03-01
Standard
AMS3279
This specification covers one type sprayable fuel resistant polythioether urethane sealing compound supplied as a two-component system.
CURRENT
2013-03-12
Standard
AMS3279D
This specification covers one type of sprayable fuel resistant polythioether sealing compound supplied as a two-component system.
CURRENT
1954-05-01
Standard
AMS3280
HISTORICAL
1998-10-01
Standard
AMS3283A
This specification covers a permanently mastic polysulfide compound in the form of a paste.
Viewing 211 to 240 of 43460