Criteria

Text:
Content:
Display:

Results

Viewing 181 to 210 of 45363
CURRENT
2014-10-28
Standard
AMS4900P
This specification covers one grade of commercially-pure titanium in the form of sheet, strip, and plate 1.000 inch (25.40 mm) and under in nominal thickness.
HISTORICAL
1995-05-01
Standard
AMS4900K
This specification covers one grade of commercially-pure titanium in the form of sheet, strip, and plate.
HISTORICAL
2006-10-30
Standard
AMS4900M
This specification covers one grade of commercially-pure titanium in the form of sheet, strip, and plate.
HISTORICAL
1999-10-01
Standard
AMS4937A
This specification covers a titanium alloy in the form of extruded bars, tubes, and shapes, and of flash welded rings and stock for flash welded rings. These products have been used typically for parts requiring high strength up to 750 °F (399 °C), particularly those parts machined and/or flash- butt welded in the annealed condition with the option of subsequent solution and precipitation heat treatment, but usage is not limited to such applications. Certain processing procedures and service conditions may cause these products to become subject to stress-corrosion cracking; ARP982 recommends practices to minimize such conditions.
HISTORICAL
1971-11-15
Standard
AMS4936
This specification covers a titanium alloy in the form of extruded bars, tubes, and shapes, and of flash welded rings and stock for flash welded rings.
CURRENT
2017-09-05
Standard
AMS4935L
This specification covers a titanium alloy in the form of extruded bars and shapes, flash welded rings 3.000 inches (76.20 mm) and under in nominal diameter or least distance between parallel sides, and stock for flash welded rings.
HISTORICAL
1977-01-15
Standard
AMS4936A
This specification covers a titanium alloy in the form of extruded bars, tubes, and shapes, and of flash welded rings and stock for flash welded rings.
HISTORICAL
1994-09-01
Standard
AMS4936D
This specification covers a titanium alloy in the form of extruded bars, tubes, and shapes, and of flash welded rings and stock for flash welded rings.
HISTORICAL
1990-01-01
Standard
AMS4936C
This specification covers a titanium alloy in the form of extruded bars, tubes, and shapes, and of flash welded rings and stock for flash welded rings.
HISTORICAL
1984-10-01
Standard
AMS4936B
This specification covers a titanium alloy in the form of extruded bars, tubes, and shapes, and of flash welded rings and stock for flash welded rings.
HISTORICAL
1999-03-01
Standard
AMS4937
This specification covers a titanium alloy in the form of extruded bars, tubes, and shapes, and of flash welded rings and stock for flash welded rings.
CURRENT
2002-07-23
Standard
AMS4936E
This specification covers a titanium alloy in the form of extruded bars, tubes, and shapes, and of flash welded rings and stock for flash welded rings.
HISTORICAL
1968-05-01
Standard
AMS4935B
This specification covers a titanium alloy in the form of extruded bars and shapes, flash welded rings, and stock for flash welded rings. These products have been used typically for parts that do not require heat treatment but require high mechanical properties in the annealed condition and for which processing above the beta transus is permissible, but usage is not limited to such applications. This alloy exhibits high strength-to-weight ratios up to 750 °F (399 °C).
HISTORICAL
1975-06-15
Standard
AMS4935C
This specification covers a titanium alloy in the form of extruded bars and shapes, flash welded rings, and stock for flash welded rings. These products have been used typically for parts that do not require heat treatment but require high mechanical properties in the annealed condition and for which processing above the beta transus is permissible, but usage is not limited to such applications. This alloy exhibits high strength-to-weight ratios up to 750 °F (399 °C).
HISTORICAL
1994-04-01
Standard
AMS4935F
This specification covers a titanium alloy in the form of extruded bars, tubes, and shapes, flash welded rings, and stock for flash welded rings.
HISTORICAL
1977-01-15
Standard
AMS4935D
This specification covers a titanium alloy in the form of extruded bars and shapes, flash welded rings, and stock for flash welded rings. These products have been used typically for parts that do not require heat treatment but require high mechanical properties in the annealed condition and for which processing above the beta transus is permissible, but usage is not limited to such applications. This alloy exhibits high strength-to-weight ratios up to 750 °F (399 °C).
HISTORICAL
2002-01-16
Standard
AMS4935G
This specification covers a titanium alloy in the form of extruded bars, tubes, and shapes, flash welded rings, and stock for flash welded rings. Primarily for parts that do not require heat treatment but require high mechanical properties in the annealed condition and for which processing above the beta transus is permissible. This alloy exhibits high strength-to-weight ratios up to 750 degrees F (399 degrees C).
HISTORICAL
2007-07-13
Standard
AMS4935H
This specification covers a titanium alloy in the form of extruded bars and shapes, flash welded rings, and stock for flash welded rings.
HISTORICAL
2009-07-15
Standard
AMS4935J
This specification covers a titanium alloy in the form of extruded bars and shapes, flash welded rings, and stock for flash welded rings.
HISTORICAL
2014-01-16
Standard
AMS4935K
This specification covers a titanium alloy in the form of extruded bars and shapes, flash welded rings, and stock for flash welded rings.
HISTORICAL
1993-10-01
Standard
AMS4934C
This specification covers a titanium alloy in the form of extruded bars, tubes, and shapes, flash welded rings, and stock for flash welded rings.
HISTORICAL
2002-01-16
Standard
AMS4934D
This specification covers a titanium alloy in the form of extruded bars, tubes, and shapes, flash welded rings, and stock for flash welded rings. These products have been used typically for parts that require high mechanical properties and are machined from product in the heat treated condition, but usage is not limited to such applications. This alloy exhibits high strength-to-weight ratios up to 750 degrees F (399 degrees C).
HISTORICAL
2007-07-13
Standard
AMS4934E
This specification covers a titanium alloy in the form of extruded bars, and shapes, flash welded rings, and stock for flash welded rings.
HISTORICAL
2011-05-25
Standard
AMS4934F
This specification covers a titanium alloy in the form of extruded bars, and shapes, flash welded rings, and stock for flash welded rings.
CURRENT
2015-01-15
Standard
AMS4934G
This specification covers a titanium alloy in the form of extruded bars, and shapes, flash welded rings up through 3.000 inches (76.20 mm) inclusive, in nominal diameter or least distance between parallel sides, and stock for flash welded rings of any size..
HISTORICAL
1959-06-15
Standard
AMS4935
This specification covers a titanium alloy in the form of extruded bars and shapes, flash welded rings, and stock for flash welded rings. These products have been used typically for parts that do not require heat treatment but require high mechanical properties in the annealed condition and for which processing above the beta transus is permissible, but usage is not limited to such applications. This alloy exhibits high strength-to-weight ratios up to 750 °F (399 °C).
HISTORICAL
1966-03-15
Standard
AMS4935A
This specification covers a titanium alloy in the form of extruded bars and shapes, flash welded rings, and stock for flash welded rings. These products have been used typically for parts that do not require heat treatment but require high mechanical properties in the annealed condition and for which processing above the beta transus is permissible, but usage is not limited to such applications. This alloy exhibits high strength-to-weight ratios up to 750 °F (399 °C).
HISTORICAL
2012-11-27
Standard
AMS4933E
This specification covers a titanium alloy in the form of extruded bars, tubes, and shapes, flash welded rings, and stock for flash welded rings up through 4.000 sq. inch (25.81 cm2) cross-section.
HISTORICAL
2008-02-15
Standard
AMS4933D
This specification covers a titanium alloy in the form of extruded bars, tubes, and shapes, flash welded rings, and stock for flash welded rings.
HISTORICAL
1984-04-01
Standard
AMS4935E
This specification covers a titanium alloy in the form of extruded bars and shapes, flash welded rings, and stock for flash welded rings. These products have been used typically for parts that do not require heat treatment but require high mechanical properties in the annealed condition and for which processing above the beta transus is permissible, but usage is not limited to such applications. This alloy exhibits high strength-to-weight ratios up to 750 °F (399 °C).
Viewing 181 to 210 of 45363