Refine Your Search

Search Results

Standard

Steel, Corrosion-Resistant, Investment Castings, 17Cr - 0.55Mo (0.95 - 1.20C), Annealed

1953-12-01
HISTORICAL
AMS5352
This specification covers a corrosion-resistant steel in the form of investment castings. These castings have been used typically for parts requiring hardness up to 58 HRC and having resistance to corrosion and to wear, but usage is not limited to such applications. Optimum corrosion resistance is obtained by hardening from 1850 to 1950 °F (1010 to 1066 °C) and tempering at not higher than 800 °F (427 °C).
Standard

Steel, Corrosion-Resistant, Investment Castings, 17Cr - 0.55Mo (0.95 - 1.20C), Annealed

1960-11-01
HISTORICAL
AMS5352A
This specification covers a corrosion-resistant steel in the form of investment castings. These castings have been used typically for parts requiring hardness up to 58 HRC and having resistance to corrosion and to wear, but usage is not limited to such applications. Optimum corrosion resistance is obtained by hardening from 1850 to 1950 °F (1010 to 1066 °C) and tempering at not higher than 800 °F (427 °C).
Standard

Steel, Corrosion-Resistant, Investment Castings, 17Cr - 0.55Mo (0.95 - 1.20C), Annealed

1976-07-01
HISTORICAL
AMS5352B
This specification covers a corrosion-resistant steel in the form of investment castings. These castings have been used typically for parts requiring hardness up to 58 HRC and having resistance to corrosion and to wear, but usage is not limited to such applications. Optimum corrosion resistance is obtained by hardening from 1850 to 1950 °F (1010 to 1066 °C) and tempering at not higher than 800 °F (427 °C).
Standard

Steel, Corrosion Resistant, Investment Castings, 16Cr - 4.1Ni - 0.28Cb - 3.2Cu, Homogenization and Solution Heat Treated or Homogenization, Solution, and Precipitation Heat Treated

1977-01-01
HISTORICAL
AMS5355C
This specification covers a corrosion resistant steel in the form of investment castings. These castings have been used typically for parts requiring good corrosion resistance and strength up to 600 °F (316 °C), but usage is not limited to such applications (See 8.3). Certain processing procedures and service conditions may cause these castings to become subject to stress-corrosion cracking; ARP1110 recommends practices to minimize such conditions. Where stress-corrosion is considered to be a factor, precipitation heat treatment should be performed at a temperature not lower than 1000 °F (538 °C).
Standard

Steel, Corrosion Resistant, Investment Castings, 16Cr - 4.1Ni - 0.28Cb - 3.2Cu, Homogenization and Solution Heat Treated or Homogenization, Solution, and Precipitation Heat Treated

1969-11-01
HISTORICAL
AMS5355B
This specification covers a corrosion resistant steel in the form of investment castings. These castings have been used typically for parts requiring good corrosion resistance and strength up to 600 °F (316 °C), but usage is not limited to such applications (See 8.3). Certain processing procedures and service conditions may cause these castings to become subject to stress-corrosion cracking; ARP1110 recommends practices to minimize such conditions. Where stress-corrosion is considered to be a factor, precipitation heat treatment should be performed at a temperature not lower than 1000 °F (538 °C).
Standard

Steel, Corrosion Resistant, Investment Castings, 16Cr - 4.1Ni - 0.28Cb - 3.2Cu, Homogenization and Solution Heat Treated or Homogenization, Solution, and Precipitation Heat Treated

1955-03-01
HISTORICAL
AMS5355
This specification covers a corrosion resistant steel in the form of investment castings. These castings have been used typically for parts requiring good corrosion resistance and strength up to 600 °F (316 °C), but usage is not limited to such applications (See 8.3). Certain processing procedures and service conditions may cause these castings to become subject to stress-corrosion cracking; ARP1110 recommends practices to minimize such conditions. Where stress-corrosion is considered to be a factor, precipitation heat treatment should be performed at a temperature not lower than 1000 °F (538 °C).
X