Refine Your Search

Topic

Author

Search Results

Standard

Standard Oil Filter Test Oil

2019-01-16
CURRENT
J1260_201901
This SAE Standard defines the requirements for an oil to be used in the SAE HS 806 Oil Filter Test Procedures.
Standard

Fuel and Oil Hoses

2012-02-17
CURRENT
J30_201202
This SAE standard covers fuel, oil, or emission hose for use in coupled and uncoupled applications, for use with gasoline, oil, diesel fuel, lubrication oil, or the vapors present in either the fuel system or in the crankcase of internal combustion engines in mobile or stationary applications. ...This SAE standard covers fuel, oil, or emission hose for use in coupled and uncoupled applications, for use with gasoline, oil, diesel fuel, lubrication oil, or the vapors present in either the fuel system or in the crankcase of internal combustion engines in mobile or stationary applications.
Standard

Engine Oil Tests

2016-06-28
CURRENT
J304_201606
The purpose of this SAE Information Report is to describe test conditions and performance evaluation factors for both diesel and gasoline engine tests. Specifically, the tests described in this document are used to measure the engine performance requirements for engine oils described by the API Service Categories described in API Publication 1509, ASTM D 4485, SAE J183, and SAE J1423 standards, U.S. military specifications, and ILSAC GF Standards.
Standard

Engine Oil Viscosity Classification

2015-01-20
CURRENT
J300_201501
This SAE Standard defines the limits for a classification of engine lubricating oils in rheological terms only. Other oil characteristics are not considered or included.
Standard

Transmission Oil Cooler Hose

2014-06-04
CURRENT
J1532_201406
This SAE Standard covers hose intended for use with automatic transmission cooling system applications. Type A hoses are intended for original equipment or replacement applications while Type B hoses are intended for aftermarket auxiliary cooler applications only. The reference fluid for tests requiring the use of automatic transmission fluid (ATF) shall be Dexron III / Mercon 5 or equivalent ATF that is agreed to by hose manufacturer and customer.
Standard

Oil Cooler Application Testing and Nomenclature

2017-03-21
CURRENT
J1468_201703
This SAE Recommended Practice is applicable to oil-to-air and oil-to-coolant oil coolers installed on mobile or stationary equipment and provides a glossary of oil cooler nomenclature. ...Such oil coolers may be used for the purpose of cooling automatic transmission fluid, hydraulic system oil, retarder system fluid, engine oil, etc. This document outlines the methods of procuring the test data to determine the operating characteristics of the oil cooling system and the interpretation of the results. ...This SAE Recommended Practice is applicable to oil-to-air and oil-to-coolant oil coolers installed on mobile or stationary equipment and provides a glossary of oil cooler nomenclature. Such oil coolers may be used for the purpose of cooling automatic transmission fluid, hydraulic system oil, retarder system fluid, engine oil, etc.
Standard

Power Cylinder Oil Consumption: Transport Mechanisms

2018-07-27
CURRENT
J2794_201807
This document covers oil transport mechanisms from the power cylinder system which might affect oil consumption. It will not discuss in detail the oil consumption mechanisms from other systems or engine components. ...It will not discuss in detail the oil consumption mechanisms from other systems or engine components.
Standard

Two-Stroke-Cycle Engine Oil Fluidity/Miscibility Classification

2017-06-05
CURRENT
J1536_201706
This SAE Recommended Practice is intended for use by engine manufacturers in determining the Fluidity/Miscibility Grades to be recommended for use in their engines, and by oil marketers in formulating and labeling their products.
Standard

A/C Compressor Oil Separator Effectiveness Test Standard

2019-07-15
CURRENT
J3112_201907
This SAE Standard establishes the test conditions and reporting method for quantifying refrigerant circuit oil circulation rate (OCR) reduction effectiveness of mobile air conditioning compressors using R-134a and R-1234yf refrigerants that include oil separators and/or other design features for the purpose of reducing the OCR in the refrigerant circuit. ...This SAE Standard establishes the test conditions and reporting method for quantifying refrigerant circuit oil circulation rate (OCR) reduction effectiveness of mobile air conditioning compressors using R-134a and R-1234yf refrigerants that include oil separators and/or other design features for the purpose of reducing the OCR in the refrigerant circuit.
Standard

Defining Hydraulic Oil Compatibility with Hydraulic Hose Elastomers

2011-10-25
CURRENT
J2631_201110
This SAE Information Report is intended to provide the hydraulic oil manufacturer and hydraulic equipment manufacturer with information that can be used predicting the relative impact that non petroleum based hydraulic oils may have on the hose elastomers in the existing system.
Standard

Engine Oil Performance and Engine Service Classification (Other than "Energy Conserving")

2017-08-29
CURRENT
J183_201708
This SAE Standard outlines the engine oil performance categories and classifications developed through the efforts of the Alliance of Automobile Manufacturers (Alliance), American Petroleum Institute (API), the American Society for Testing and Materials (ASTM), the Engine Manufacturers Association (EMA), International Lubricant Specification Advisory Committee (ILSAC), and SAE.
Standard

Standard Oil Filter Test Oil

1983-06-01
HISTORICAL
J1260_198306
This SAE Standard defines the requirements for an oil to be used in the SAE HS J806N83 Oil Filter Test Procedures.
Standard

Standard Oil Filter Test Oil

1994-04-01
HISTORICAL
J1260_199404
This SAE Standard defines the requirements for an oil to be used in the SAE HS J806N83 Oil Filter Test Procedures.
Standard

Standard Oil Filter Test Oil

2007-08-07
HISTORICAL
J1260_200708
This SAE Standard defines the requirements for an oil to be used in the SAE HS J806N83 Oil Filter Test Procedures.
Standard

Standard Oil Filter Test Oil

1989-04-01
HISTORICAL
J1260_198904
This SAE Standard defines the requirements for an oil to be used in the SAE HS J806N83 Oil Filter Test Procedures.
Standard

Standard Oil Filter Test Oil

2012-10-15
HISTORICAL
J1260_201210
This SAE Standard defines the requirements for an oil to be used in the SAE HS 806 Oil Filter Test Procedures.
X