Tests for Signal and Marking Devices Used on Vehicles 2032 mm or More in Overall Width

Standard:
Revised:
  • 2013-04-09
 
Publisher:
  • SAE International
Pages:
16
Scope:

This SAE Recommended Practice provides standardized laboratory tests, test methods, and performance requirements applicable to signal and marking devices used on vehicles 2032 mm or more in overall width.

Rationale:

Document was modified by SAE Staff to bring it up to date with SAE practices for abbreviations, document names, addresses and etc.

Changed 2.1 title to Applicable “Documents” per SAE Editorial review

Moved Reference for SAE J578 Color to Related Documents because it is not mentioned in the standard

Added SAE J2721 Recommended Corrosion Test Methods for Commercial Vehicle Components to section 2.1.1

Added Section 2.1.3 for ISO documents

Created Section 2.2 Related Documents

Created Section 2.2.1 SAE Publications

Moved all SAE related documents relevant to the standard but not referenced in the standard to section 2.2.1

Modified 3.8 to “A lighting device which does not allow the passage of gas or water between the interior environment and the exterior environment per SAE Editorial review

4.2 Changed name of section to Moisture Intrusion Tests

Added statement in 4.2 - Choose one or more of the following tests in sections 4.2.1, 4.2.2 or 4.2.3 based on product application and with agreement between the manufacturer and customer

Removed sentence in 4.2.1 - Devices tested to 4.2.2 and complying with 5.2.2 of this document can be excluded from this test

Removed Section 4.2.1.2.5 - 5 minute operation of lamp during test. The committee consensus was that it was not adding any relevance to the test and removing it would make it consistent with J575.

Renumbered remaining section

Added Section 4.2.3 IP rated Sealing test

Changed title of 4.3 to Dust Integrity Tests

Added statement in 4.3 - Choose one or more of the following tests in sections 4.3.1 or 4.3.2 4.2.3 based on product application and with agreement between the manufacturer and customer

Removed Statement from section 4.3 Devices tested to 4.2.2 and complying with 5.2.2 of this document can be excluded from this test.

Changed 4.3.1 to SAE Dust Tests and renumbered section to reflect that change

Changed Section 4.3.2 to IP Rated dust Test

Removed Section 4.3.2.8 - 5 minute operation of lamp during test. The committee consensus was that it was not adding any relevance to the test and removing it would make it consistent with J575.

Renumbered remaining section

Removed Section 4.4.2.5 - 5 minute operation of lamp during test. The committee consensus was that it was not adding any relevance to the test and removing it would make it consistent with J575.

Added section 4.4.3 Additional Corrosion Testing

Added section 4.5.3 Testing Procedures for LED based lighting

Eliminated use of oven in Section 4.6 similar to what was done in J575

Added section 5.5.2 Testing procedure for LED based lighting

Changed wording in 5.8.2 to be more clear – remain was changed to become

History:
Standard Published Revision Status
J2139_201412 2014-12-02 Latest Revised
2013-04-09 Historical Revised
2005-09-19 Historical Revised
2001-03-16 Historical Revised
Access
Now
SAE MOBILUS Subscriber? You may already have access.
Buy
Select
Price
List
Download
$76.00
Add
Mail
$76.00
Members save up to 18% off list price.
Grade
If you are currently using this technical report:
Share
HTML for Linking to Page
Page URL

Related Items

Book
2009-02-27
Technical Paper / Journal Article
2010-09-28