Side Turn Signal Lamps for Vehicles Less than 12 m in Length

Standard:
Revised:
  • 2014-08-11
 
  • CURRENT
Publisher:
  • SAE International
Pages:
13
Scope:

This SAE Standard provides installation requirements, test procedures, design guidelines, and performance requirements for side turn signal lamps for vehicles less than 12 m in length.

Rationale:

2.2.2 European Community removed. Although many sources still refer to ECE Regulations the nomenclature has changed in the UN and these documents are now referred to as UN Regulations 3.1 Note updated for clarity Side Turn Signal Lamp (E2) will remain unchanged from previous versions of this standard 3.2 Rear Facing Side Turn Signal Mirror mounted removed from the description. The lamp can meet the photometric requirements of Figure 2 without being mounted in a mirror Rear Facing Side Turn Signal (E3) is unique from the E2 turn lamp since it’s minimum peak intensity is 8x brighter than an E2 lamp (value chosen from jury evaluation in Spring 2006), and it’s visibility does not extend as far outward as an E2 or E4 lamp 3.3 Side Facing Side Turn Signal Mirror mounted removed from the description. The lamp can meet the photometric requirements of Figure 3 without being mounted in a mirror Side Facing Side Turn Signal (E4) is unique from the E2 turn lamp since it’s minimum peak intensity is 5x brighter than an E2 lamp (value chosen from jury evaluation in Spring 2006), and it’s visibility does not extend as far outward as an E2 lamp, or as far rearward as an E3 lamp 3.4 Side Direction Indicator added to allow for harmonized function with UN requirements 4.2 Mirror mounted removed from the description. The lamp can meet the photometric requirements of Figure 2 without being mounted in a mirror 4.3 Mirror mounted removed from the description. The lamp can meet the photometric requirements of Figure 3 without being mounted in a mirror 4.4 E5, Side Direction Indicator added to allow for harmonized function with UN requirements 5.1.5.1 Removed since J575 is being followed 5.1.5.2 Updated to include J1889 only when LED light sources are used 5.1.5.2 add a new J1889 test point for stabilization >> H,30L, removed reference to mirror 5.1.5.3 Mirror mounted removed from the description. 6.1.5.2 Mirror mounted removed from the description. The lamp can meet the photometric requirements of Figure 2 without being mounted in a mirror 6.1.5.3 Mirror mounted removed from the description. The lamp can meet the photometric requirements of Figure 3 without being mounted in a mirror 6.1.5.4 added to include Side Direction Indicator 6.2.1.1 Mirror mounted removed from the description, added side direction indicator lamps (E5 Identification). 7.1.5 Mirror mounted removed from the description. Figure 2 updated so test point totals equal zone totals Figure 3 updated so test point totals equal zone totals Figure 4 added to define Side Direction Indicator test points Figure 5 (new/replacement)to clarify test point orientation Figure 6 (was previous Figure 4)

History:
Standard Published Revision Status
J914_201408 2014-08-11 Latest Revised
2009-09-21 Historical Revised
2003-07-21 Historical Revised
2000-03-08 Historical Revised
1995-01-01 Historical Revised
1978-07-01 Historical Revised
1973-08-01 Historical Revised
1968-10-01 Historical Revised
Access
Now
SAE MOBILUS Subscriber? You may already have access.
Buy
Select
Price
List
Download
$76.00
Add
Mail
$76.00
Members save up to 18% off list price.
Grade
If you are currently using this technical report:
Share
HTML for Linking to Page
Page URL

Related Items

Training / Education
2018-04-13
Technical Paper / Journal Article
2011-04-12
Technical Paper / Journal Article
2011-04-12
Technical Paper / Journal Article
2011-04-12
Training / Education
2018-04-12