New Standards
New, Revised, Reaffirmed, Stabilized, and Cancelled SAE Aerospace Material Specifications

September 2017

New standards status definitions

Click on the document number to find out more or to order online!

Document Committee Status Title
AMS2221G AMSD Reaffirmed Tolerances, Copper and Copper Alloy Bars and Rods
AMS2223H AMSD Reaffirmed Tolerances, Copper and Copper Alloy Seamless Tubing
AMS2224G AMSD Reaffirmed Tolerances, Copper and Copper Alloy Wire
AMS2435H AMSB Stabilized Coating, Tungsten Carbide-Cobalt Coating, Detonation Process
AMS2451/6B AMSB Revised Plating, Brush Copper General Purpose
AMS2510F AMSB Stabilized Engine Gray Finishing, Low Baking
AMS2550F AMSB Stabilized Treatment of Sheet Metal Parts Corrosion-Resistant Steel
AMS2647F AMSK Revised Fluorescent Penetrant Inspection Aircraft and Engine Component Maintenance
AMS2685F AMSB Stabilized Welding, Tungsten Arc, Inert Gas, (GTAW Method)
AMS2690D AMSB Stabilized Parallel Gap Welding, Microelectronic Interconnections to Thin Film Substrates
AMS3079C AMSB Stabilized Compound, Corrosion-Preventive, Soft Film, Hot Application
AMS4029L AMSD Reaffirmed Aluminum Alloy Sheet and Plate, (2014; -T6 Sheet, -T651 Plate), Solution and Precipitation Heat Treated
AMS4163F AMSD Revised Aluminum Alloy, Extrusions 6.3Cu - 0.30Mn - 0.18Zr - 0.10V - 0.06Ti (2219-T3511) Solution Heat Treated, Stress-Relieved by Stretching, and Straightened
AMS4203C AMSD Reaffirmed Aluminum Alloy, Plate 6.2Zn - 1.8Cu - 2.4Mg - 0.13Zr (7010-T7351) Solution Heat Treated, Stress Relieved, and Precipitation Heat Treated
AMS4251B AMSD Revised Aluminum Alloy Sheet, 2.7Cu - 2.2Li - 0.12Zr (2090-T83), Solution Heat Treated, Cold Worked, and Precipitation Heat Treated
AMS4305 AMSD Reaffirmed Aluminum Alloy, Extruded Profiles (7449-T79511) 8.1Zn - 1.8Cu - 2.2Mg - 0.16Zr Solution Heat Treated,Stress Relieved, and Overaged
AMS4401A AMSD Reaffirmed Aluminum Alloy Plate (7140-T7451) 6.6Zn - 1.8Cu - 2.0Mg - 0.10Zr Solution Heat Treated, Stress Relieved and Overaged
AMS4466A AMSD Revised Aluminum Alloy, Sheet and Plate, Alclad, 4.4Cu - 1.5Mg - 0.60Mn (Alclad 2024, -T361 Sheet & Plate), Solution Heat Treated, 6% Cold Worked and Naturally Aged
AMS4468 AMSD Reaffirmed Aluminum Alloy, Plate 5.0Cu - 0.4Mn - 0.5Mg - 0.4Ag (2139-T84) Solution Heat Treated, Cold Worked,and Artificially Aged
AMS4500J AMSD Reaffirmed Copper, Sheet, Strip, and Plate, Soft Annealed
AMS4602D AMSD Reaffirmed Copper Bars, Rods, and Shapes, Oxygen-Free, Hard Temper (HO4)
AMS4614H AMSD Reaffirmed Brass Forgings, Free Cutting 60Cu - 2.0Pb - 37.5Zn As Forged (M10)
AMS4870F AMSD Reaffirmed Aluminum Bronze, Centrifugal and Chill Castings 85Cu - 11Al - 3.6Fe As Cast
AMS4892D AMSF Revised Alloy Castings, Corrosion and Heat-Resistant, 66Ni - 29Cu - 4.0Si, As Cast
AMS4935L AMSG Revised Titanium Alloy Extrusions and Flash Welded Rings 6Al - 4V Annealed Beta Processed
AMS4971L AMSG Revised Titanium Alloy, Bars, Wire, Forgings, and Rings 6Al - 6V - 2Sn Annealed, Heat Treatable
AMS4981H AMSG Revised Titanium Alloy Bars, Wire, and Forgings, 6.0Al - 2.0Sn - 4.0Zr - 6.0Mo, Solution and Precipitation Heat Treated
AMS5333G AMSE Revised Steel, Investment Castings, 0.50Cr - 0.55Ni - 0.25Mo (0.11 - 0.17C) (SAE 8615), Normalized
AMS5336J AMSE Revised Steel, Investment Castings, 0.95Cr - 0.20Mo (0.25 - 0.35C) (4130 Mod), Normalized or Normalized and Tempered
AMS5337E AMSE Revised Steel, Maraging, Investment Castings 18.5Ni - 9.0Co - 5.0Mo - 0.70Ti - 0.12Al Vacuum Melted Homogenized, Overaged, and Solution Heat Treated
AMS5338H AMSE Revised Steel, Investment Castings 0.95Cr - 0.20Mo (0.35 - 0.45C) (4140 Mod) Normalized or Normalized and Tempered
AMS6323M AMSE Revised Steel, Mechanical Tubing 0.50Cr - 0.55Ni - 0.25Mo (0.38 - 0.43C) (SAE 8740)
AMS6327L AMSE Revised Steel Bars and Forgings, 0.50Cr - 0.55Ni - 0.25Mo (0.38 - 0.43C) (SAE 8740), Heat Treated, 125 ksi (862 MPa) Tensile Strength
AMS6407K AMSE Revised Steel, Bars, Forgings, and Tubing, 1.2Cr - 2.0Ni - 0.45Mo (0.27 - 0.33C)
AMS6450K AMSE Revised Steel, Spring Wire, 0.95Cr - 0.22V (0.48 - 0.53C) (SAE 6150), Annealed and Cold Drawn
AMSM45202B AMSB Stabilized Magnesium Alloys, Anodic Treatment of
AMSM7866B AMSB Stabilized Molybdenum Disulfide, Technical, Lubrication Grade